Product details
Model PT-10 1208 Versatile TDM over IP Converter
Introduction
PT-10 1208 works as PWE3 (Pseudowire Emulation Edge-to-Edge) device, to achieve the highest interoperability, it successfully implement most TDMoIP technologies, such as MEF and ITU-T standard. It adopts RFC5087 (TDMoIP), RFC5086 (CESoPSN), RFC4553 (SAToP), MEF-8 (PDHoME) for various types of traffic handling. The built-in extra large jitter buffer up to 8s and 4s PDV (Packet Delay Variation) compensation, guaranty the precision of TDM timing reconstruction; ensure the PT-10 1208 can work for most the time insensitive networks, such as wireless bridge network and IP network.
To enhance the flexibility, PT-10 1208 supports 13KB jumbo frame on the Ethernet port; 26K MAC address learning; 4096 VLAN; Q-in-Q as well as QoS; ToS and CoS. SFP designs for uplink Ethernet that can suit in optical (SFP/LC) or electrical (SFP/GE-T ) module. Two expansion slots on the rear panel can insert for various types of voice / data module or 4 E1 downlink module. Front panel provides additional uplink E1 supports cross connection and carry voice / data services to remote location. It can support point to point and point to multipoint application.
Optional redundancy power supply is available with any combination of AC and DC power. Such a function rich with redundancy uplink and redundancy power supply, just mounted on the 1U height, 19 inches width rack mountable casing. This design is highly compact, reliable and simple managed. Such powerful equipment can reduce our customer CAPEX and OPEX tremendously.
Features
● 19” rack mountable, 1U height compact size;
● Multi-services with voice / data, E1 and IP over IP link;
● Guaranty 100Mbps bandwidth for Ethernet transport over the 1.25G fiber optical Ethernet uplink;
● System provides 2 x 1.25Gbps optical Ethernet interface;
● Uplink Ethernet port with SFP/GE-T (RJ45) electrical module is available;
● Learning bridge and IEEE 802.1q port based VLAN supported on the Ethernet switching ports;
● Supports E1 package QoS assurance, framed and unframed;
● Additional uplink E1 supports 75W and 120W, user definable;
● Two expansion slots for E1 / data or voice modules;
● Adjustable transmission delay from 4ms to 4s;
● In-band management channel for remote control and system management;
● Complete local and remote loopback facility for system diagnostic;
Specification
● E1 Interface Bit rate: 2.048Mbps ±50ppm Code type: HDB3 code, G.703 standard Input impedance: 75Ω or 120Ω Frame structure: G.704, G.706 Jitter: G.742, G.823 ● Power Supply Input voltage: -48Vdc or 220Vac Voltage range: -36Vdc ~ -72Vdc, 176Vac ~ 264Vac Power consumption: <10W ● Operation Environment Working temperature: -10°C ~ 50°C Working humidity: 5% ~ 95 % (non-condensed) Storage temperature: -40°C ~ +80°C |
● Uplink Ethernet Optical Interface Bit rate: 1.25Gbps ±50ppm Output optical power: ≥-15dBm Receiving sensitivity: ≤-35dBm Optical wavelength: 1310nm/1550nm Optical interface connecter: SFP/LC ● Uplink Ethernet Electrical Interface Bit rate: 1000Mbps, full duplex Connector: SFP/GE-T (RJ45) ● Downlink Ethernet Electrical Interface Bit rate: 10/100Mbps, half/full duplex auto Standard: IEEE 802.3, IEEE 802.1Q (VLAN) Connector: RJ45 ● Mechanical Structure Dimension: 440mm x 270mm x 44mm Net weight: 4Kg |
Application
Diagram 1: Point to point |
Diagram 2: Point to multipoint |
http://www.photel.cn/