Product details
High-Speed Carbide Circular Saw KCS-70A, This is our new short tail type machine, the tail length is only 20~20+α(cutting length), which greatly save material and save processing time, normally, machine only have two servo motors, the feeding servo motor, the cutting servo motor, this type has the 3rd servo motor which in front of the main clamping device, through the 3rd servo motor, it clamped the material and pull out, till the cutting length, which ramains a short tail behind.
When compared with C type, A type are more suitable for cutting hard steel, for example, stainless steel, alloy steel... on the other hand, A type is a newly designed type when compared with C type, the inner structure, the outlooking, the weight, all different.
Standard Voltage is 3Phase, 380V, 60Hz, can also be customized according to different country standards.
Model/Specification |
KCS-70A |
|
Cutting Capacity |
Round |
Φ 10-70 mm |
Square |
Φ 10-55 mm |
|
TCT Saw Blade |
Blade Size |
Φ 285*2.0T |
Pin hole size |
4*Φ11*PCD63*Φ32 mm |
|
Rotating speed |
22-220 rpm |
|
Length accuracy |
+/-0.05 mm |
|
Chip clean |
Steel Brush |
|
Motor Power |
Spindle motor |
7.5 kw/4P |
Hydraulic motor |
2.2 kw |
|
Cutting servo motor |
2.0 kw |
|
Feeding servo motor |
1.0 kw |
|
Chip conveyor motor |
0.2 kw |
|
Coolant pump motor |
0.19 kw |
|
Hydraulic |
Hydraulic pressure |
70kg/m² (7mpa) |
Fuel tank volume |
90L |
|
Pneumatic |
Air pressure |
4-8 kg/m² (0.4-0.6mpa) |
Feeding & Clamping |
Feeding length |
5~800 mm |
Tailing Length |
20~20+α(cutting length) |
|
Feeding drive mode |
AC servo motor+ ball screw+ linear guide |
|
Clamping mode |
Horizontal clamping & Vertical clamping |
|
Electricity |
Voltage & Hertz |
3Phase, 380V, 60Hz or customized |
Size & Weight |
Size |
687*270*175cm |
Weight |
4200kg |
http://www.keensawmachine.com/